Hot Selling Steam Boiler Heating Element Super Heater And Reheater flue duct

Heating Element Super Heater And Reheater Introduction

1. The Rankine Cycle equipped with a reheater, will have at least two levels of steam turbine: high pressure turbine and low pressure turbine.

2. High pressure steam turbine output steam, commonly known as cold reheat steam, has lower pressure and temperature of main steam, before entering the turbine.

3. Although the cold reheat pressure is drop significantly, it still has not reached its saturation point. So, if this steam reheated, it will return to superheated steam. Therefore the cold reheat steam that exits the high pressure turbine, will be reheated back into the boiler.

Reheater Description

1. Reheater is a part of boiler which to reheat steam output from the first level of steam turbine.

2. Reheated steam will again absorb the heat energy from boiler to be used in the next level steam turbine.

3. Reheater is one way to improve the thermal efficiency of the Rankine Cycle.

Reheater Type & Characteristics

1. The diameter of the tube is generally 30-60 mm. It has a relatively dense pipe group, which is arranged in flue gas temperature 450 - 1000 C, and is scoured horizontally and vertically by flue gas.

2. The flue gas mainly convects heat to the pipe, and some radiation absorbs heat. The former absorbs the radiation heat of the furnace flame, while the latter absorbs part of the convective heat.

3. In power plant boilers above 10 MPa, both screen and serpentine tube superheaters are usually used to increase heat absorption.

4. The wall superheater applied on the inner wall of the furnace is radiation superheater, which is seldom used. The wall-enclosed superheater is used to form the top of the furnace and the wall of the convective flue duct in a large-capacity power plant boiler.

5. The light furnace wall is made of insulating material. The picture shows the arrangement of several superheaters. Small capacity industrial boilers equipped with superheaters usually use convective superheaters of single-stage tubes to meet the requirements.

Differences

Parameters

Product Display

    Dehai Boiler is a manufacturer of A-class boiler(Power station boiler,industrial boiler,HRSG,waste-to-energy boiler,biomass boiler) and correlated A-class pressure parts intergrating the design,fabrication,installation,repair and mainteance.

Dehai has ISO9001:2008 certificate issued by France AFAQ-EAQA Ltd,A-class boiler manufacturing license,ASME S Stamp and U Stamp authorized certificate.

    Through effective management system and high quality products,Dehai became the qualified supplier of many famous boiler factories and energy companies and has won a lot of stable customers both domestic and abroad ,such as :Amec Foster Wheeler,Alstom,Dongfang Boiler,Harbin Boiler,Hangzhou Boiler,etc.

    Based on the business idea of "High quality for survival and perfect service for development",we shall care for customers' demand and keep improving our work permanently. To create Dehai brand,is to serve clients with our improved products and better performance.

    Dehai is located in Economic and Technological Development Zone,Zhangjiagang City,Jiangsu Province. S38 highway Zhangjiagang exit is about 1.5 kilometers to the north of our company and the traffic is very convenient.